Are you trying to identify your AMG wheels and wondering if they will fit your Mercedes-Benz W124 E320? Many Mercedes enthusiasts consider upgrading their wheels for both aesthetic and performance improvements. AMG Monoblock wheels are a popular choice, known for their iconic design and sporty appeal. Let’s delve into identifying these classic wheels and understanding their fitment on a W124 model.
Identifying AMG Monoblock I Wheels
From your description, it sounds like you might have the original AMG Monoblock I wheels. These are recognizable by their distinctive, solid five-spoke design. You mentioned that the inside lip looks wider than on some examples you’ve seen, which is a key point to consider. The width of the lip can vary depending on the wheel’s size, particularly when comparing 16-inch versus 17-inch diameters.
For instance, a 16×7.5 inch AMG Monoblock I wheel, like the ones mentioned with an ET37 offset, might have a different lip size compared to a 17×8 inch version. The larger diameter and width of the 17-inch wheel often result in a more pronounced lip. To confirm if you have genuine AMG Monoblock I wheels, look for AMG markings or stamps on the wheel itself, usually on the back. These markings are crucial for authenticating AMG wheels.
W124 Fitment Considerations for AMG Mags
Fitting aftermarket wheels, especially wider ones like 8-inch AMG mags, on a W124 Mercedes-Benz requires careful attention to offset (ET). Offset is the distance between the wheel’s mounting surface and its centerline, and it significantly impacts how the wheel sits within the wheel arch. An incorrect offset can lead to fitment issues, such as the wheel rubbing against the fender or suspension components.
With an 8-inch wide wheel, you’re approaching the limit for a W124. The offset needs to be precise to ensure proper clearance. For reference, the 16×7.5 inch ET37 wheels, when paired with 205/55/16 tires, already sit quite close to the fender lip on a 1995 E320 W124. Upgrading to wider tires, like 215/55/16, on the same wheels might result in very tight clearance and potential rubbing, especially under suspension compression.
It’s generally understood that an ET41 offset provides more inner and outer clearance for W124s. Some owners successfully use wheels as large as the ones you are considering, but it often requires careful tire selection and sometimes fender modifications, depending on tire size and suspension setup.
Tire Size and Staggered Setups
Regarding tire width, 225mm is generally considered the maximum width for W124s. Many W124 enthusiasts run 225/45/17 tires on 17×7.5 inch wheels with ET35 or ET37 offsets. If you’re considering a staggered setup—wider wheels and tires on the rear axle than the front—you might gain a little more room in the rear for wider tires.
Ultimately, determining if your AMG mags will fit perfectly on your W124 sometimes requires a test fit. Each car can have slight variations, and factors like suspension stiffness and ride height also play a role in tire clearance. Trying the wheels and tires on your specific vehicle is the most reliable way to confirm fitment and ensure no rubbing occurs under various driving conditions.
Mercedes Benz W124 E320 with AMG Wheels Fitment
In conclusion, identifying AMG Monoblock I wheels often involves checking for specific markings and understanding the wheel’s design characteristics. For W124 Mercedes-Benz fitment, particularly with wider AMG mags, careful consideration of wheel offset and tire size is crucial. While general guidelines exist, a test fit is often the best way to guarantee proper and safe fitment for your vehicle.
